It is a high-speed, dual-band home access point with CAT12 LTE for really fast Internet anywhere, anytime. But LTE is not the only option Chateau also features 5 x Gigabit Ethernet ports and a full size USB port.

The MikroTik mANTBox ax 15s with a Manufacture Part Number L22UGS-5HaxD2HaxD-15S is designed to simplify and enhance outdoor wireless networking. A drop-in Wi-Fi 6 upgrade for the popular mANTBox dual-band sector antenna base stations. This powerful device is ideal for providing high-speed, stable, and secure point-to-multipoint connectivity across vast distances, with potential coverage up to 20 kilometers under optimal conditions.

Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks. Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers, masts and poles with hose clamps. netPower 16P has a non-blocking throughput of 36 Gbps, switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps. Device itself does not have an onboard voltage converter. You need 24V PSU to have 24V PoE out and/or 48V PSU to have 48V PoE out (IEEE 802.3 at/af). A Power supply is NOT included with the product. You are welcome to use your preferred power option, like battery pack etc. Compatible also with MikroTik power supplies 24HPOW, MTP250-53V47-OD, MTP250-26V94-OD, 48POW and 48V2A96W (these are linked below the article).

Mikrotik cAP XL ac Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek – the low profile attracts less attention than a smoke detector. Your clients, guests, or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises

The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.

A new version of our popular heavy-duty RB5009 router with PoE-in and PoE-out on all ports. Perfect for small and medium ISPs. 2.5 Gigabit Ethernet & 10 Gigabit SFP+, numerous powering options.

The MikroTik RouterBoard RB5009UG+S+IN is the ultimate compact home lab router, the RB5009, boasting exceptional power and versatility. Equipped with USB 3.0, 1G and 2.5G Ethernet ports, along with a 10G SFP+ cage, this router offers unprecedented performance within a small form factor. Responding to user feedback, we've crafted a router with remarkable processing capabilities, multiple powering options, and efficient cooling, perfectly suited for home labs. MikroTik RouterBoard RB5009UG+S+IN Key Features: High-Performance Networking Versatile Connectivity Compact and Efficient Design Flexible Powering Options The board features 9 wired ports, including 7 Gigabit Ethernet, 1 2.5 Gigabit Ethernet, and a 10G SFP+ cage, all linked to a robust Marvell Amethyst switch-chip and a Marvell Armada Quad-core ARMv8 1.4 GHz CPU, benefiting from the case's heat-dissipating design. The RB5009UG+S+IN can be powered through PoE, DC Jack, or a 2-pin terminal. With 1GB DDR4 RAM and 1GB NAND storage, this configuration delivers nearly double the performance of similar-sized alternatives under intense CPU loads. Moreover, the router's mounting accessories allow effortless installation of up to four units in a single 1U rack space, streamlining productivity without the server room puzzle.

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unitv The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space Dimensions: 228 x 120 x 30 mm; PoE in: Passive PoE; PoE in input Voltage: 18-57 V; Max power consumption: 33 W

About this item RB1100AHx4 is a 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128) Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support) CPU: AL21400; CPU core count: 4; CPU nominal frequency: 1.4 GHz; Dimensions: 444 x 148 x 47 mm; License level: 6; Operating System: RouterOS Size of RAM: 1 GB; Storage size: 128 MB; PoE in: 802.3af/at; PoE in input Voltage: 20-57 V; Number of AC inputs: 2; Memory card type: microSD

the new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11ac opens up new possibilities and speeds never possible before. The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam- width sector antenna. Also supports 802.11a/n mode and is compatible with all legacy RouterBOARD devices, including Nstream and Nv2 protocols. Both devices come with Gigabit Ethernet.

0dbi 60 Degree Integrated AP/Backbone/CPE, Dual Chain, Gigabit Ethernet Mikrotik is introducing the first complete AP/CPE for 2.4GHz - SXTG2HnD! It's powerful 60 degrees 2x2 MIMO 10dbi sector antenna with wireless on-board - you can use it as a Sector AP, to make wireless point-to-point links or as a CPE- whatever you prefer! It comes with L4 license, perfect for covering outdoor area for hotspot clients. The unit is equipped with Gigabit Ethernet port, so customers can take full advantage of dual chain MIMO. It has the same form factor as MikroTik popular 5Ghz SXT model.

The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.

The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner (see photos for comparison)

hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. The port #5 can power other passive PoE capable devices with the same voltage as applied to the unit. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.

hEX also known as RB750Gr3 is a five port Gigabit Ethernet router for locations where wireless connectivity is not required The device has a full size USB port. This new updated revision of the hEX brings several improvements in performance It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880MHz CPU and 256MB RAM IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude Dimensions: 113x89x28mm; Storage size: 16 MB; Passive PoE (PoE in); PCB temperature monitor, Voltage monitor and Mode button

5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac³ can satisfy even the biggest and most demanding households. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included

The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration.

hAP ax³ is our most powerful AX device with the best wireless network coverage so far. It features a modern quad-core ARM CPU running at 1.8 GHz and enough memory (1GB RAM + 128 MB NAND) for most tasks. Complex firewall rules, IPsec hardware encryption, Wireguard, BGP, advanced routing, or multiple remote work VPN tunnels won’t stop your family from comfortable browsing, streaming, gaming, and so on. There’s enough processing power for everyone. And we’ve added a speedy USB 3 port for all your storage purposes or an additional LTE modem.

MikroTik's Cloud Core Router series, introduced in early 2023, represents a cutting-edge lineup of high-capacity routers designed to connect and consolidate small computer networks into a single large network. These routers offer powerful single-core performance, making them ideal for handling heavy operations with per-connection processing. The series features a range of models with various port configurations and redundant power supplies, catering to diverse networking needs for businesses, ISPs, research facilities, and more. With their advanced features and affordability, MikroTik's Cloud Core Routers are a reliable choice for taking networking setups to the next level.

CCR2004-1G-12S+2XS is equipped with the new AL32400 1.7 GHz quad core CPU and features 12x 10G SFP+ and 2x 25G SFP28 ports, dual redundant power supplies and 1U rackmount case. The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget a

CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU. But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR produc